Product Description Hunter Grey Selector Cap for the G800 Series Top and bottom covers For use with Hunter Golf Rotors G85B & G885E The selector cap turns the solenoid when the user changes the on-auto-Off settings. under normal operating conditions, the selector cap should not need replacement. the selector cap can become damaged if the incorrect tool is used to make on-auto-Off selection adjustments. With the Solenoid and Pilot Valve assembly installed in the flange compartment and the Solenoid set to the Auto position, proceed as follows. The flat side of the Solenoid should be facing away from the rotor’s riser assembly pointing towards the outside of the flange compartment. Starting from where the solenoid’s lead wires come out of the top of the solenoid, place the lead wires side-by-side over the top and down the flat side of the Solenoid. While hold the Solenoid’s lead wires in this position, place the selector cap on top of the solenoid. the selector cap must be oriented such that the solenoid’s lead wires fit into the recessed channel on the inside wall of the selector cap. press the selector cap down and onto the solenoid Click for G800 Owners Manual
Only logged in customers who have purchased this product may leave a review.
-91%
-20%
-20%
